RACK EM' BOYS!!!
Quinnamp SDO Rack Tube Preamps
Perfect for direct recording or pairing with your favorite power amp or any amp with a "Power Amp
Input" jack. In fact if you own one of the many "d" style amps and it has a "Power Amp
Input" jack on the rear then this is a way to get an entirely different voice without needing
to buy a whole new amp! Simply plug into the SDO Preamp and output it into the Power Amp
Input jack on your amp and viola! An all "new" amp!!
Also performs extremely well for direct recording. Late night computer recording anyone?
This is also no "plate starved" tube device. This unit operates at the same voltages found in
the real SDO amps.
Control panel from left to right:
Input, Input Gain, Bright Switch, Mid Boost Switch, Rock/Jazz Switch, Treble, Middle, Bass,
OD Gain, OD Level, Master Volume, Power Indicator.
Rear control panel from right to left, AC receptacle, Fuse, Power Switch, Output, DIN
Footswitch Jack, PAB (Pre-Amp Boost) Switch, Channel Select Switch.
2 function (Clean/Overdrive & Preamp Boost) footswitch is included.
Lead time is around 45 days.
Cost for the version shown is $850.
Cost for Monkey Knobbed "Mr. H" versions is $1000
Quinn-U-Lator.
Tube Buffered Effects Loop.
Perfect for driving pedals and rack effects or driving long cable runs.
Can be also be used as an added gain stage, as a global master volume, or even to "smooth"
tone. Can also be used to brighten tone via the bright switches on the effects Send & Return
Level controls. Put those time based effects where they belong AND give both the effects
and the amp the impedance each wants to have. Can also be used before an amp to drive long
cables or tone sucking effects.
Can be used in any amp with a PASSIVE effect loop. Get the most of your SDO or any "d"
style amp or ANY amp with a passive effects loop.
Pair with the above SDO Rack Tube Preamp for the basis of one very flexible rig!
Control panel from left to right is:
Effects Send Level, Effect Send Bright Switch, Effects Return Level, Effects Send Bright
Switch, Power Switch, Power Indicator Lamp.
Rear control panel from left to right:
AC Receptacle, Fuse, Output To Amp, Effects Return jack, Effects Send Jack, Input.
Lead time is around 45 days.
Cost is $500.
Stereo and Dual Loops run from $700 and up depending on feature set.
Please inquire for more info.
